Description
K-Reamer (steel) 120mm 0.15 (4 pack)
iM3 Control Cut K-Reamer (steel) 120 mm 0.15 (4 pack)
ISO 0.15
Taper 0.02
120 mm overall length - 30 mm working length
Sold in packs of four
Used in a clockwise turning movement, K-Reamers have less turns on the active part than K-Files.
Our Steel K-Reamers have high torsional strength and excellent flexibility.
Files and Reamers are intended to be single use and the cost factored in to each procedure.
iM3 Control Cut brings a universal approach to veterinary endodontics. We use the same taper across our entire endo range including hand files, rotary files, gutta percha and paper points. So whether you use a manual, rotary, or hybrid approach to your endo procedures, the iM3 Control Cut delivers precise and controlled canal shaping and perfectly fitting gutta percha for every treatment.
Sterilization
Files must be sterilized before use. ANSI/ADA Specification 28 recommends:
- Scrub the instruments with soap and warm water
- Rinse thoroughly with distilled or deionized water
- Allow to air dry
- Place instruments, unwrapped, in the autoclave tray
- Use fresh distilled or deionized water
- Steam Autoclave at 136°C (+/-2°C) for 20 minutes
- Recommended file disposal: Place used files in Biohazard Sharps container
